Фреза DARK Куля 4 мм (Синя)

The ball-shaped bit helps to gently and quickly perform manicure and pedicure in hardware and combined techniques, perfectly lifts and cleans the cuticle, and polishes rough skin in the lateral folds and sinus area. Suitable for both beginners and experienced nail technicians.

Characteristics:

• Can withstand dry heat sterilization;
• High-quality diamond coating;
• Does not rust during sterilization;
• Uniform diamond abrasive coating;
• Helps to gently and quickly perform manicure and pedicure in hardware and combined techniques;
• Resistant to temperature, moisture, and steam;
• Diamond particles are additionally sieved, ensuring the same geometric shape and perfectly even coating on the bit;
• The base of each bit is tested for radial run-out;
• The coating is checked under a microscope.

Blue marking: Suitable for treating rough, dry skin and final polishing, as well as for significant calluses, corns, and cracks.

Recommendations for use:

• Rotation speed: 5,000-15,000 RPM for devices with a power of 30-65 watts;
• Disinfection: Use a disinfectant solution or a special bit cleaning solution.

We do not recommend cleaning diamond bits with metal brushes; it is better to use a hard-bristled plastic brush.

• Sterilization: Use an autoclave or dry heat sterilizer, be sure to pre-dry on the drying mode in the dry heat sterilizer/UV-lamp instrument storage or simply in the air (in a separate clean area) for at least 6 hours.