Фреза DARK Тупе полум'я 2.4x10 мм (Червона)

Diamond burr with blunt flame-shaped tip will help safely and quickly perform manicure and pedicure in both electric (drill-based) and combined manicure/pedicure techniques; it gently lifts the cuticle, cleans the lateral folds and bruising, and buffs rough skin. It is especially suitable for beginners with little experience in manicures; thanks to its rounded tip, it minimizes the risk of nicks in the cuticle area and on the lateral folds.

Characteristics:

• High-quality diamond coating;
• Withstands dry-heat sterilization;
• Does not rust during sterilization;
• Has uniform diamond coating;
• Helps safely and quickly perform manicure and pedicure in electric (drill-based) and combined manicure/pedicure techniques;
• Resistant to temperature, moisture and steam;
• Diamond particles are additionally sieved, therefore they have the same geometric shape and are perfectly evenly coated on the burr;
• The base of each burr is checked for radial runout;
• The coating is inspected under a microscope.

Red marking: Suitable for working with normal, thin, soft and sensitive skin, as well as for treating light roughness, calluses and cracks, finishing polishing.

Usage recommendations:

• RPM: 10,000-20,000 for devices with power 30-65 watts;
• Disinfection: disinfectant solution or a special solution for treating burrs.

We do not recommend cleaning diamond burrs with metal brushes; better to use a plastic brush with stiff bristles.

• Sterilization: autoclave or dry-heat sterilization; be sure to pre-dry using the drying mode in a dryer/UV lamp storage area or simply in the air (in a separate clean zone) for at least 6 hours.