Stamping plate DARK 03

DARK PLATE - a metal plate for creating designs using the stamping technique. It features deep and clear engravings for convenient use. The wide range of designs allows you to quickly and easily create any drawing.

DESCRIPTION:

• features high-quality engraving for convenient use;
• allows you to create even complex designs without drawing skills;
• recommended to use together with DARK STAMPING POLISH and DARK Stamping Stamper.

HOW TO USE:

1. Perform manicure, apply base/gel or color, cure in a lamp;
2. If a tacky sticky layer is present, remove it using DARK GEL CLEANSER;
3. Apply polish to the plate, scrape off the excess with a scraper, and transfer the design to the stamper;
4. Transfer the design from the stamper to the nail with a rolling or straight motion;
5. Apply top coat (if the top coat slides off the design, first apply a thin layer of clear base, then apply the top coat).

WHY THE DESIGN MIGHT NOT TRANSFER TO THE STAMPER:

1. The polish should not be thickened; make sure to pick up enough polish on the brush so there is enough to cover the design;
2. Apply polish to the plate in 1-2 strokes - the longer you apply, the worse the transfer, as the polish dries in the air;
3. Use the scraper at an approximate 45-degree angle, without pressing hard, so as not to 'push' polish out of the design;
4. Scrape quickly (2-4 strokes are enough), avoiding wide swings across the plate;
5. Quickly put the scraper down and pick up the stamper (remember, when working with polishes, there is no extra time);
6. Transfer the design onto the stamper with a soft rolling motion; DO NOT try to press the stamper hard onto the plate-the harder you press, the more polish stays in the plate.