Stamping plate DARK 05

DARK PLATE - a metal plate designed for creating nail art using the stamping technique. Features deep and precise engravings for easy use. A wide selection of designs allows you to create any pattern quickly and effortlessly.

Description:

• High-quality engraving for convenient work;
• Enables even intricate designs without drawing skills;
• It is recommended to use together with DARK STAMPING POLISH and DARK Stamping Stamp.

How to Use:

1. Perform a manicure and apply base/gel or color; cure in a lamp.
2. If there is a sticky residue, remove it with DARK GEL CLEANSER.
3. Apply stamping polish to the plate, scrape off the excess with a scraper, and transfer the design onto the stamp.
4. Transfer the design from the stamp to the nail using a rolling or straight motion.
5. Cover with top coat (if the top coat runs off the design, first apply a thin layer of transparent base, then top coat).

Why the Design Might Not Transfer onto the Stamp:

1. The polish should not be too thick; make sure to pick up enough product on the brush to cover the design area.
2. Apply the polish to the plate in 1-2 strokes; the longer it takes, the more likely the polish will partially dry, resulting in poor transfer.
3. Use the scraper at a 45-degree angle without pressing hard, so as not to remove too much polish from the design.
4. Scrape quickly (2-4 movements are sufficient) and do not cover the entire plate with wide strokes.
5. Promptly put down the scraper and pick up the stamp-remember, timing is crucial as polish dries in air.
6. Transfer the design onto the stamp with a soft rolling motion; avoid pressing down hard, as this leaves more polish in the plate.