DARK 14 stamping plate

DARK Plate is a metal stamping plate for creating nail art designs using the 'stamping' technique. It features deep and clear engravings for easy and convenient work. The wide selection of designs allows you to create any pattern quickly and easily.

Description:
- High-quality engraving for ease of use;
- Allows even complex designs to be created without drawing skills;
- Recommended to be used with DARK STAMPING POLISH and DARK Stamper for stamping.

How to use:
1. Perform manicure and apply base/gel or color, cure under a lamp;
2. If there is a sticky inhibition layer, remove it using DARK GEL CLEANSER;
3. Apply polish to the plate, remove the excess with a scraper, and transfer the design onto the stamper;
4. Transfer the design from the stamper onto the nail with a rolling or straight motion;
5. Apply top coat (if the top coat slides off the design, apply a thin layer of clear base first, then the top coat).

Reasons why the design may not transfer to the stamper:
1. The polish should not be too thick; make sure to pick up enough polish with the brush to cover the design;
2. Apply polish to the plate with 1-2 strokes; the longer it takes, the more likely the transfer will be poor because the polish dries in the air;
3. Use the scraper at approximately a 45-degree angle; do not press hard to avoid pushing the polish out of the design;
4. Work quickly with the scraper (2-4 movements are enough); do not sweep across the whole plate;
5. Next, quickly set aside the scraper and take the stamper in your hand (remember, when working with stamping polishes, time is limited);
6. Transfer the design onto the stamper with a gentle rolling motion; do NOT press the stamper into the plate hard, as more pressure leaves more polish on the plate.