DARK 15 stamping plate

DARK PLATE - a metal plate for creating nail designs using the 'stamping' technique. Features deep and clear engravings for convenient work. A wide selection of designs allows you to make any pattern quickly and easily.

DESCRIPTION:

• High-quality engraving for comfortable use;
• Allows you to create even complex designs without drawing skills;
• Recommended to use together with DARK STAMPING POLISH and DARK Stamping Stamper.

APPLICATION METHOD:

1. Perform manicure and apply base/gel or color, cure under the lamp;
2. If there is a sticky inhibition layer, remove it with DARK GEL CLEANSER;
3. Apply polish to the plate, use a scraper to remove the excess and transfer the design onto the stamper;
4. Transfer the design from the stamper to the nail using a rolling or straight motion;
5. Cover with top coat (if the top coat slides off the design, apply a thin layer of clear base first, then the top coat).

WHY A DESIGN MAY NOT TRANSFER ONTO THE STAMPER:

1. The polish should not be too thickened; do not use too little on the brush, so there is enough to spread over the design;
2. Apply polish to the plate in 1-2 strokes; the longer you apply, the worse the result as the polish dries in the air;
3. Work with the scraper at about a 45-degree angle, without pressing hard, to avoid 'pushing out' the polish from the design;
4. Move the scraper quickly (2-4 strokes are sufficient), do not sweep across the whole plate;
5. Quickly put down the scraper and pick up the stamper (remember, when working with polish, there is no extra time);
6. Transfer the design onto the stamper with a gentle rolling motion; DO NOT press the stamper hard into the plate, as more pressure will leave more polish on the plate.