Stamping plate DARK 16

DARK PLATE is a metal stamping plate for creating nail designs using the stamping technique. It features deep and precise engravings for easy work. A large selection of patterns allows you to quickly and effortlessly create any design.

DESCRIPTION:

• High-quality engraving ensures convenient use;
• Enables you to create even complex designs without drawing skills;
• Recommended to use with DARK STAMPING POLISH and DARK Stamping Stamper.

HOW TO USE:

1. Perform a manicure and apply base/gel or color, cure under a lamp;
2. If a sticky dispersive layer is present, remove it using DARK GEL CLEANSER;
3. Apply polish onto the plate, use the scraper to remove excess and transfer the design onto the stamper;
4. Transfer the design from the stamper onto the nail with a rolling or steady motion;
5. Finish with top coat (if the top coat runs off the design, first apply a thin layer of clear base, then the top coat).

WHY A DESIGN MAY NOT TRANSFER TO THE STAMPER:

1. The polish should not be too thick; use a sufficient amount of polish on the brush to cover the design;
2. Apply polish onto the plate in 1-2 strokes; the longer the application, the worse the transfer as the polish dries quickly;
3. Work with the scraper at approximately a 45-degree angle without pressing too hard to prevent removing too much polish from the pattern;
4. Scrape quickly (2-4 times is enough), avoiding broad movements over the entire plate;
5. Immediately set down the scraper and pick up the stamper - swift action is necessary as stamping polishes dry fast;
6. Transfer the design onto the stamper with a gentle rolling motion - do not press the stamper hard onto the plate, as excessive pressure will leave polish in the plate.