DARK 15 stamping plate

DARK PLATE - a metal plate for creating designs using the 'stamping' technique. It features deep and clear patterns for easy use. A wide selection of designs allows you to quickly and easily create any pattern.

DESCRIPTION:
- features quality engraving for convenient use;
- allows for creating even complex designs without drawing skills;
- recommended to be used with DARK STAMPING POLISH and DARK Stamping Tool.

APPLICATION METHOD:
1. Perform manicure and apply base/gel or color, cure under the lamp;
2. If there is a sticky layer, remove it with DARK GEL CLEANSER;
3. Apply polish to the plate, scrape off the excess with a scraper, and transfer the pattern to the stamper;
4. Transfer the pattern from the stamper to the nail with a rolling or flat motion;
5. Seal with a top coat (if the top coat runs off the pattern, apply a thin layer of clear base before applying the top coat).

WHY THE PATTERN MAY NOT TRANSFER TO THE STAMP:
1. The polish should not be thickened; apply sufficient polish to the brush to cover the pattern;
2. Apply polish to the plate using 1-2 strokes; the longer you take, the worse the transfer will be since the polish dries in the air;
3. Work with the scraper at an angle of about 45 degrees, without pressing too hard to avoid 'squeezing' the polish out of the pattern;
4. Work with the scraper quickly (2-4 strokes are enough), and do not swipe across the entire plate;
5. Then, quickly set down the scraper and pick up the stamper (remember, there is no extra time when working with polishes);
6. Transfer the pattern to the stamper with a gentle rolling motion; DO NOT try to force the stamper into the plate— the more you press, the more polish will remain on the plate.