DARK 10 stamping plate

DARK PLATE - a metal plate for creating designs using the 'stamping' technique. It features deep and clear patterns for easy work. A wide selection of designs allows you to quickly and easily create any pattern.

DESCRIPTION:
- features high-quality engraving for convenient work;
- enables even complex designs to be made without drawing skills;
- recommended for use with DARK STAMPING POLISH and DARK Stamping Stamper.

USAGE INSTRUCTIONS:
1. Perform a manicure and apply base/gel or color, curing in a lamp;
2. If there is a sticky layer, remove it using DARK GEL CLEANSER;
3. Apply polish to the plate, scrape off the excess with a scraper, and transfer the design to the stamper;
4. Transfer the design from the stamper to the nail with a rolling or flat motion;
5. Finish with a top coat (if the top coat runs off the design, apply a thin layer of clear base first, then the top coat).

WHY THE PATTERN MAY NOT TRANSFER TO THE STAMP:
1. The polish should not be thickened; use enough polish on the brush to distribute it over the design;
2. Apply the polish to the plate in 1-2 strokes; the longer you apply, the more likely it is to dry in the air and affect the transfer;
3. Work with the scraper at an angle of about 45 degrees, without pressing too hard to avoid 'squeezing' the polish out of the design;
4. Work quickly with the scraper (2-4 strokes are enough) without sweeping across the entire plate;
5. Next, quickly place the scraper down and grab the stamper (remember, we don't have extra time when working with polishes);
6. Transfer the design to the stamper with a soft rolling motion, DO NOT attempt to PRESS the stamper hard into the plate; the more you press, the more polish will remain in the plate.